Maintenance - Movement movebench Manual Del Proprietário

MAINTENANCE

7
CLEANING
Clean the equipment weekly using a soft nylon brush. Pass a vacuum cleaner under the equipment to prevent dust and dirt from
accumulating, which can effect the operation of the equipment. Always use water, mild soap, and a soft cloth to clean the upholstery of
the equipment before and after training. Wait for the machine to dry completely to start a new workout. Never use acid cleaners. Never
pour water onto the equipment or apply liquid spray.
LOCK
If you find the lock damaged, with its thread bent or not offering the proper tightening to lock the
weight plates, make the immediate replacement of the parts. The lock is extremely important as it
prevents the weights from coming loose and causing accidents. If any damage is identified,
discontinue use and immediately contact an Authorized Point to exchange the part.
WEIGHT
When using the accessories, it is common for the weights to suffer a lot of impacts. However, at the
end of the exercise, it is not recommended to release any of the accessories from the height of the
hands with the arm outstretched, as they can damage the weights and cause accidents.
HANDLES
Before starting the exercise, check that the handles and their locking threads are not damaged.If any
damage is identified, discontinue use and immediately contact an Authorized Point to exchange the
part.
BARBELL
Before starting the exercise, check that the bars and their locking threads are not damaged.If any
damage is identified, discontinue use and immediately contact an Authorized Point to exchange the
part.
ACCESSORIES
Inspect all accessories before and after each use. Always look for scratches, holes, tears, frayed areas,
streaks, discoloration, loose stitching, or defects in the latex of the strap. Do not use them if you
encounter any of these or other situations. Contacts an authorized dealer and exchange the part.
17