How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation STELLAR MAD7998 Serie Manual Del Usuario

Ventilador de techo 96

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

NOTE: This step is applicable after the necessary wiring

is completed.

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy housing

and not pinched between the housing and the ceiling.

1. Remove one of the two shoulder screws in the

hanger bracket. Loosen the second shoulder screw

without fully removing it. Assemble canopy by

rotating key slot in canopy over shoulder screw in

hanger bracket. Tilt the motor assembly to the side

to have more space to tighten shoulder screws.

Fully assemble and tighten second shoulder screw

that was previously removed. (Figure 1a)

2. Securely attach and tighten the canopy screw

cover over the shoulder screws in the hanger

bracket utilizing the keyslot twist-lock feature.

(Figure 1b)

How to Assemble Your Ceiling Fan Blades

INSTALLATION NOTE

Do not connect fan blades until the fan is completely

installed. Installing the fan with blades assembled may

result in damage to the fan blades.

▲WARNING

To reduce the risk of personal injury, do not bend the

blades when installing, balancing or cleaning the fan.

Do not insert foreign objects in between the rotating

blades.

1. Carefully slide the blade through the slot as shown.

Make sure the notch of blade is fully seated into the

hex socket screw. Securely fasten the eight blades

to the motor housing using the blade plates and

button head screws. (Figure 1)

NOTE: You will find the fan blade set packed in its own

carton and hardware bag in the fan box.