Irrigation Hosepipe Laying Attachment; Converting The Machines - Checchi & Magli AL-S14 PLUS Manual De Uso Y Mantenimiento

Irrigation hosepipe laying attachment

The laying attachment is used to dig a furrow in the ground and lay the irrigation hosepipe inside it.
UN41-0335-FM
Laying attachment assembly______________________
1) Position the laying attachment on the work vehicle.
2) Fit the U-bolts (A).
3) Tighten the nuts (B).
4) Unroll the hosepipe, following the route shown in
the figure.

Converting the machines

Danger - Warning
The machines must be converted by trained, author-
ised personnel with appropriate equipment to en-
sure the safety of the people involved in the opera-
tions.
English language
ENCLOSURES
Adjust the laying attachment______________________
To adjust the laying attachment, proceed as outlined be-
low.
1) Loosen the nuts (C).
2) Raise or lower the laying attachment to alter the
hosepipe laying depth.
3) Tighten the nuts (C).
Danger - Warning
Take all the precautions required to work safely.
Contact the manufacturer's authorised service cen-
tres if you are unsure as to how to work competently
and safely.
38
A
Use and maintenance