Adjusting The Forming Sides - Checchi & Magli AL-S14 PLUS Manual De Uso Y Mantenimiento

Adjusting the forming sides

Combined adjustment of the sides (crosswise and verti-
cal) determines the width and height of the bed.
Crosswise adjusting _______________________________________________________________________________
UN41-0338LI
a) width of the bed
To adjust the sides, proceed as outlined below.
1) Loosen nuts (A) and (B).
2) Loosen nuts (C) and (D).
Vertical adjustment _______________________________________________________________________________
To adjust the shaping of the raised bed, proceed as out-
lined below.
1) Loosen the nuts (A).
2) Move the element (B) as a function of the need.
3) Tighten the nuts (A).
Repeat the same procedure for the other element.
Information
Once you have adjusted the sides, adjust the convey-
ing shares accordingly (see "Adjusting the external
conveying ploughshares " and "Adjusting the inter-
nal conveying ploughshares").
English language
ADJUSTMENT INFORMATION
Conveniently adjust the sides to produce the bed as re-
quired.
=
a
=
3) Move the sides by the same amount, either away
from or closer to machine's centre line, to determine
the width of the bed.
4) Tighten nuts (A) and (B).
5) Tighten nuts (C) and (D).
UN41-0307LI
18
E
5
B A
Use and maintenance