Campbell Hausfeld 1 HP Instrucciones De Funcionamiento Y Montaje página 4

Operating Instructions and Assembly Instructions
Airless Paint Sprayers
General Safety Information
(Continued)
WARNING
!
Do not spray flammable
materials in vicinity of
open flame or near
ignition sources. Motors, electrical
equipment and controls can cause
electrical arcs that will ignite a
flammable gas or vapor. Never store
flammable liquids or gases in the
vicinity of the unit.
Do not spray acids,
WARNING
!
corrosive materials,
toxic chemicals, fertilizers or
pesticides. Using these materials could
result in death or serious injury.
G Do not use fuels to clean this
equipment.
G Keep spraying area well ventilated.
Keep doors and windows open.
G Remove all ignition sources (i.e.
Static electricity, pilot lights,
cigarettes and electrical arcing).
G Airless spraying can cause static
electricity. Always ground the
pump and spraying surface. Always
use a 3-wire grounded extension
cord and power receptacle.
G Do not use solvents containing
halogenated hydrocarbons.
Keep hose away
CAUTION
!
from sharp objects.
Bursting hoses may cause injury.
Examine hoses regularly and replace if
damaged.
G Check hoses for weak or worn
condition before each use, making
certain that all connections are
secure.
FAILURE TO FOLLOW
THESE INSTRUCTIONS
CAN RESULT IN SERIOUS
INJURY OR DEATH.
www.chpower.com
Assembly Instructions
1
Attach Wheels
3
Install Bucket Hook
4
4
5
Attach Gun and Hose
2
Push
Lock
Attach Handle
Attach Hose