En - Important Instructions; For Your Safety; Instructions For Assembly - Kettler COACH M Instrucciones De Montaje

Ocultar thumbs Ver también para COACH M:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
– EN – Important Instructions
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

!
RISK!
While assembly of the product keep off children's reach
(Choking hazard - contains small parts).
!
RISK!
Any other use of the equipment is prohibited and may be
dangerous. The manufacturer cannot be held liable for damage
or injury caused by improper use of the equipment.
!
RISK!
Instruct people using the equipment (in particular child-
ren) on possible sources of danger during exercising.
!
RISK!
Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the sa-
fety of the user.
!
RISK!
Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
!
WARNING!
The training device should be used only for its in-
tended purpose, i.e. for physical exercise by adult people.
!
WARNING!
Before beginning your program of training, study
the instructions for training carefully.
!
WARNING!
Any interference with parts of the product that are
not described within the manual may cause damage, or en-
danger the person using this machine. Extensive repairs must
only be carried out by KETTLER service staff or qualified per-
sonnel trained by KETTLER.
!
WARNING!
This training device is for home use only.
The training device has been designed in accordance with the
latest standards of safety. Any features which may have been
a possible cause of injury have been avoided or made as safe
as possible.
The training device corresponds with DIN EN ISO 20957-
1/DIN EN 957-7, class HB. It is therefore unsuitable for thera-
peutic use.
In case of enquiry, please contact your KETTLER dealer.
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the attach-
ment of grip strap, running plate and fastening of the handlebar

Instructions for Assembly

RISK!
!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
!
WARNING!
Please note that there is always a danger of injury
when working with tools or doing manual work. Therefore
please be careful when assembling this machine.
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
4
and front tube.
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
The location for the device must be selected such that a sufficient
and safe distance from any obstacles is maintained. In the im-
mediate vicinity of the main operational directions, nothing else
should be placed. There should be at least one meter of free
space
surrounding
Make sure that no one, other than the person who is training,
is in the device space when the device is in motion.
Always observe the general safety rules and precautions for
working with electrical equipment.
Nobody may be in the moving range of a training person du-
ring training
This exercise machine may only be used for exercises indicated
in the training instructions.
This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it to
deaden any noise or impacts. Only for appliances with weights.
Avoid powerful oscillations of the dumbbells!
When mounting the product please take the recommended tor-
que information into account (
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as in-
structed.
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
nary assembly work (e.g. addition of tubing plugs).
the
exercise
space.
= xx Nm).

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

07974-100

Tabla de contenido