Description Of The Controls; Hitching And Unhitching The Work Vehicle To And From The Tractor - Checchi & Magli WOLF PRO Serie Manual De Uso Y Mantenimiento

Description of the controls

B
A
UN41 0793NQ
A) Knob: this is used to adjust the planting depth (see
page 16).
B) Lever: this is used to adjust the set-up of the
dispenser(s) so that the seedlings are planted in the
ground upright (see "Planting procedure" on page
23).

Hitching and unhitching the work vehicle to and from the tractor

WARNING
Hitching the work vehicle up to the tractor is one of
the riskiest moments as it could required the involve-
ment of several people at once, carrying out synchro-
nised manoeuvres between the tractor driver and the
operators on the ground, which - if badly organised
- could result in accidents.
B
UN41 0794NQ
English language
INFORMATION FOR USE
WOLF PRO
C
E
G
F
A
C
B
A
WOLF PRO COMPACT
D
C) Lever: this is used to change the position of the sup-
port wheel in relation to the soil and to help maintain
correct work vehicle positioning during work.
D) Lever: this adjusts the weight of the packing wheels
on the ground (see page 17).
WARNING
The work vehicle must only ever be coupled to a
tractor with an appropriate power rating which is
equipped with a lift that complies with the regula-
tions in force, observing the maximum weight limit
on the rear axle and the gross vehicle weight (see
tractor user manual).
Check that the work vehicle coupling to the tractor at
the third point of the hitch is securely locked so that
it cannot work loose.
A
H
B
21
WOLF PRO COMPACT
C
D
B
C
C
A
Use and maintenance
6