Prolonged Disuse Of The Work Vehicle - Checchi & Magli PLASTIC - STOP PLUS Serie Manual De Uso Y Mantenimiento

When transporting the work vehicle/tractor assembly,
the regulations of the highway code must always be
complied with.
Procedure for using the mulching machine combined with the planting machine
A
UN41 0265DI
The mulching machine can be coupled to a WOLF plant-
ing machine using a specific kit for attachment to the
rear 3-point hitch or using the reinforced frame kit.
The rear hitch kit or reinforced frame kit can be supplied
already mounted on the machine or as an optional ac-
cessory later.
The kit for attaching to the rear 3-point hitch (A) must be
compulsory mounted on the mulching machines when
they are combined with WOLF/1 and WOLF/2 planting
machines.
The reinforced frame kit (B) must be compulsory mount-
ed on the mulching machines when they are combined

Prolonged disuse of the work vehicle

If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Check that the main fixing nuts and bolts are tight.
4) Grease to all the unpainted parts.
English language
INFORMATION FOR USE
The three-point hitch must be secured with the relative
bars (A) to prevent the work vehicle swinging against
the tractor and the speed of travel must be adjusted to
prevent loss of control of the tractor.
with WOLF/3 and WOLF/4 planting machines.
For use of a planting machine, please see the specific
"Operation and Maintenance" manual supplied with the
planting machine.
Danger - Warning
Only ever couple the mulching machine to the plant-
ing machines envisaged by the manufacturer (see
"Technical specifications - Planting machines that
can be coupled to the machine").
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
7) Lower the resting feet to the ground to guarantee
work vehicle stability.
24
6
B
Use and maintenance