Cameo ROOT PAR TW Manual De Usuario página 16

Settings
Disp Rev = Rotates display
Disp Back = Display backlight
Sig Fail = Operating status if
control signal
is lost
IR Remote = Activates or deac-
tivates control via
IR remote control
PWM = LED PWM
Frequency
Calibration = Color calibration
Reset = Resets settings
Edit Preset = Saves all system
settings in three
individual presets
Service = Only for servicing purposes
16
No Display does not rotate
Yes Display rotates 180° (e.g., for overhead
installation)
Off Deactivates after approx. 30 seconds of
inactivity
On Permanently on
Hold Last command is held
Black Activates blackout
Dir Setting in stand-alone mode Direct is
activated
On Activates control via the IR remote
Off Deactivates control via the IR remote
650 Hz, Selects the LED PWM frequency
1530 Hz,
2150 Hz,
4000 Hz
Cold White Individual adjustment of brightness from
cold white and warm white with values
Warm White
from 0 to 255 (independent of mode)
Factory Resets to factory settings: Press ENTER to
reset, MENU to cancel
Preset A Resets to Preset A: Press ENTER to reset,
MENU to cancel
Preset B Resets to Preset B: Press ENTER to reset,
MENU to cancel
Preset C Resets to Preset C: Press ENTER to reset,
MENU to cancel
Preset A Press ENTER to save
Preset B Press ENTER to save
Preset C Press ENTER to save