Cameo ROOT PAR TW Manual De Usuario página 9

Ocultar thumbs Ver también para ROOT PAR TW:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 75
FUSE
5
Fuse holder for 5 × 20 mm micro fuses. IMPORTANT NOTE: Only replace the fuse with a fuse of
the same type and values. If a fuse trips repeatedly, please contact an authorized service center.
OLED-DISPLAY
6
The OLED display shows the currently active operating mode (main display), the menu options in
the Options menu, and the numerical values or operating status for certain menu options. If there
is no input within approx. two minutes, the display automatically switches to the main display.
Note on the main display in operating modes with external control: As soon as the control signal
is interrupted, the symbols on the display will begin to flash. When the control signal is present
again, the flashing will stop. Starting from the main display, briefly press UP to rotate the display
180°.
CONTROL KEYS
7
MODE – you can access the options menu by pressing MODE. Pressing it again will return you
to the main display. If you press MODE without having first pressed ENTER to confirm a value or
status change, the previously confirmed value or status shall be restored.
ENTER – pressing ENTER takes you to the menu level, on which value changes can be made, and
you can reach the submenu using ENTER. Value or status adjustments can also by confirmed by
pressing ENTER.
UP and DOWN – selects the individual menu options in the selection menu (DMX address, operat-
ing mode, etc.) and in the submenus. Allows you to change the value of a menu option (e.g., DMX
address) as desired.
MIC
8
Microphone for music control mode.
TILT
9
Knurled screw for tilting when used as uplight. The twin mounting bracket can be removed for a
more subtle look.
RUBBER FEET
10
Four rubber feet for stability.
SAFETY EYEBOLT
11
Safety eyebolt for securing the spotlight on crossbeam installations.
HANDLE SCREWS
12
The two handle screws are used to adjust and fix the stand or mounting bracket.
PORT FOR W-DMX™ CONNECTION
The USB-A connector for the optional iDMX stick is located on the side of the spotlight opposite
the connection panel.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Clrootpartw

Tabla de contenido