SYSTEM INFORMATION (SYSTEM INFO)
Starting from the main display, press MODE to go to the main menu. Using UP and DOWN, now
select the System Info menu option and press ENTER to confirm your selection.
This will take you to the submenu which will let you access system information (see table, use UP
and DOWN to select, press ENTER to confirm, use UP and DOWN to change status, press ENTER to
confirm).
System Info
Firmware
= Displays the device
firmware
Temperature = Displays tempera-
ture of LED unit
Op. Hours
= Displays operating
time
Firmware
V1.xx
LED
xxx°C / xxx°F
Unit
°C (= displays in degrees Celsius)
°F (= displays in degrees Fahrenheit)
xx:xx h
Displays the total operating time in
hours and minutes
17