Anspach eG1 Manual De Instrucciones página 11

4. Optional (E-FP-DIR/IRR only): To activate irrigation, depress Irrigation Control Switch on top right of foot
control for a minimum of one second. Light on front of console will be on to indicate irrigation is active. Press
on foot control pedal to start handpiece and irrigation.
Priming Irrigation System
1. Once irrigation tubing is set-up the line may be primed from console.
2. Press and hold irrigation button on front of console for a minimum of 3 seconds to start priming process.
3. Release irrigation button to stop priming process once irrigation fluid is visible at the handpiece.
4. Confirm light is on indicating irrigation system is operational.
5. If irrigation light is not on, depress irrigation button on front of console to activate irrigation.
System Operational Assessment
1. Confirm attachment and dissection tools are properly locked in place.
2. Depress foot pedal to assure you have properly functioning device prior to proceeding.
3. Device functions as expected, if device does not function as expected refer to troubleshooting chart.
LONG-G1
LONG-HD-G1
MEDIUM-G1
MEDIUM-HD-G1 Visually inspect for any damage to the tube.
MIA16-G1
SHORT-G1
SHORT-HD-G1
MA-D20-G1
QD8-G1 Visually inspect for bent or broken drive shaft and for any damage to the tube.
QD11-G1
CRANI-A-G1
CRANI-L-G1 Visually inspect for bent or broken foot.
CRANI-P-G1
CSR60-G1 Visually inspect for overall damage or missing components.
E-FP
Visually inspect for damage to the electrical cord or connector.
E-FP-DIR
Visually inspect for damage or cracks to the housing or pedal.
E-FP-DIR/IRR
Visually inspect for damage to the silicone hose or to the electrical connector.
Connect to console and operate.
EG1A
The handpiece should operate smoothly.
There is no requirement to operate with attachment or dissection tool.
Visually inspect for damage or cracks to the housing. Visually inspect for damage to
SC3001
the electrical power cord. Power the system and inspect for illumination of the LEDs.
SC3002
If there is an irrigation pump present check for proper function.
Prior to Use Inspection
7