2. Operation with an alarm system
Associated with an alarm system, the transmitter can:
- be warned if there is an alert,
- remotely control the alarm.
2.1 Be warned if there is an alert
Process of a call cycle in the event of an intruder alarm or technical defect
For an alert (intruder alarm or technical defect), the telephone transmitter calls the recorded numbers
(6 max.) in turn until a contact stops the call cycle.
Ê The transmitter dials the first recorded number,
if the contact does not pick up or if they do not acknowledge
the call, the transmitter then dials the 2nd number, then the
3rd... up to the 6th number.
Ë If no contact picks up, the transmitter repeats the cycle:
no.1, no.2, no.3, etc.
Hence, the transmitter makes 16 consecutive calls.
The cycle stops automatically after 16 calls.
To stop the call cycle, press the
For a technical defect (except for smoke detectors), the call is triggered after 30 seconds.
2.2 TTGSM TYXAL+ transmitter
For the TTGSM TYXAL+ transmitter,
you can select voice call
for each number recorded.
The Voice/SMS choice can be configured from the
CLT 8000 TYXAL+ touch screen keypad.
Example: you have 5 numbers recorded, of which 2 are SMS. (no.2 and no.4)
Ê The transmitter dials the first recorded number,
if the contact does not pick up or if they do not acknowl-
edge the call, the transmitter then sends an SMS to no.2.
The transmitter continues the cycle and calls no.3, sends
an SMS to no.4 then dials the 5th number recorded if
no-one picks up.
Ë If no contact picks up, the transmitter repeats the cycle:
no.1, no.3, no.5, etc.
The TTGSM TYXAL+ does not send any other SMS during
the next cycles.
The transmitter automatically stops after 4 consecutive
cycles.
button.
and SMS
30
Ê
Ë
1
7
n°1
2
8
n°2
3
9
n°3
4
10
n°4
5
11
n°5
6
12
n°6
Voice call
4
TTRTC TYXAL+
4
TTGSM TYXAL+
Ê
Ë
1
6
n°1
n°1
2
7
n°3
n°2
3
8
n°5
n°3
4
n°4
5
n°5
13
n°1
n°1
14
n°2
n°2
15
n°3
n°3
16
n°4
n°4
n°5
n°6
Voice call
SMS
-
4
9
12
n°1
n°1
10
13
n°3
n°3
11
14
n°5
n°5
Automatic
shutdown