POWER SUPPLY
Please verify the local power source before plugging into the power outlet, and use the
individual power socket and original adaptor.
Alternative power supply
1)(9V/400mA)adaptor
2) (6V/4A) internal rechargeable battery
Power Consumption
About 300mW (without backlight)
About 380 mW (with backlight)
Low battery warning
When "
" appears in the upper left corner of the weight window, the battery power
requires recharging. The charge lamp turns green from red when the recharging is
completed (which takes about 8 hours). Disconnect the scale from power supply when it is
fully charged. A full charged battery can operate the scale for approximately 65 hrs with
backlight, 80hrs without backlight.
Note: Battery is to be replaced only by an authorized service dealer .Risk of explosion can
occur if replaced with the wrong type or connected improperly
SETTING MODE
Function Setting
1) Press
key while powering on, or
parameter setting. The window displays "check"
2) Press key
3) Press key
4) Press key
5) Press key
6) Press key
7) Press key
or
to shift between the functions
to enter the selected parameter.
or
to circle the items of present parameter.
to save after changing and return to parameters choosing.
to return without saving.
again to return to weighing mode.
key in the weighing mode to enter
8