2 Product description
2 Product description
2.1 Designated use
2.2 Use contrary to the designated use
2.3 Technical Data
Transport and storage
Relative humidity
Tab. 1
Ambient temperature
Dimensions
Minimum cooling capacity
Tab. 2
General data
1Only liquid-cooled torches
EN - 4
knowledge of the relevant standards, are able to assess the tasks assigned
to them and identify possible dangers (in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in
question.
• Ensure good lighting of the work area and keep the work area clean.
• Occupational health and safety regulations of the country in question. For
example, Germany: Protection Law and the Company Safety Ordinance.
• Regulations on occupational safety and accident prevention.
The iSTM must be used in the robot welding area. Designated use also includes
the observance of the prescribed operating, maintenance and servicing
instructions.
Any use other than that described under "Designated use" is considered
contrary to the designated use. Unauthorized conversions are not allowed. The
warranty does not cover wear parts and damage due to overloading or
improper use.
ø = 73 mm
1
800W
- 10 °C to + 55 °C
up to 70 % at 20 °C
L = 109 mm
iSTM