Troubleshooting; Technical Specifications - Lenco DVP-9412 Manual Del Usuario

First Time Installation
USB
To access the Menu, press the Menu button and select USB.
USB
Multimedia
Photo Configure
Movie Configure
EXIT Return OK
Multi-Media
Switch to USB mode and plug in USB to view files.

Technical Specifications

Item Sub Item Parameter
170~230MHz
Input Frequency
470~860MHz
Tuner
RF Input level -25~-82dBm
IF Bandwidth
7MHz and 8MHz
QPSK,16QAM,64QAM
Modulation
MPEG4 AVC/H.264 HP@L4
Decoder Format
MPEG2 MP@ML.HL
Video
576P , 720P, 1080i, 4:3 and 16:9
Output Format
HDMI (only for TV mode)
Output Port
Confirm

Troubleshooting

Problem Potential Reasons
Power isn't connected
No picture
The power switch
is not on
DVB-T cable not
Screen shows
connected
No Signal
Incorrect setting
No sound from No or incorrect connection
speaker
with audio cable
Sound on mute
Incorrect sound track
Only sound, no No or incorrect connection
image on the
with AV cable
screen
The program is a radio
program
Remote Control
The battery is exhausted
is not responding
Remote Control is not
facing or close enough
to the Set Top Box
The image stopped The signal is too weak
suddenly or mosaic
14
What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Reset setting
Connect the audio cable
correctly
Turn off mute function
Try another sound track
Make sure cables are
connected correctly
Press <TV/RADIO> key
to shift into TV mode
Change battery
Adjust the position of the
Remote Control and
move closer to the unit
Strengthen the signal