Step 17 Connect Power; Step 18A. Install Stainless Steel; Toekick; Step 18B. Install Custom Toekick For - Monogram ZKBSN720NSS Instrucciones De Instalación

STEP 17 CONNECT POWER

• Check to be sure the power cord is plugged into the
receptacle.
Electrical Master Light
Outlet
• Check to make sure power to refrigerator is on by
opening refrigerator door to see if interior lights are on.
• The temperature controls are preset at 37°F for the
fresh food section and 0°F for the freezer.
• Allow 24 hours for temperature to stabilize before
making adjustments.
STEP 18A INSTALL STAINLESS
STEEL TOEKICK
• Attach the toekick assembly to the refrigerator using
the 4 supplied screws (I) - one on each side and two
in the center.
H
HH
31-1000414 Rev. 1
INSTALLATION INSTRUCTIONS
Raise
Grille
Panel
Switch
STEP 18B INSTALL CUSTOM
TOEKICK FOR STANDARD
INSTALLATION
• A custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template to cut the shape.
IMPORTANT: A custom toekick can be installed to
match or complement the surrounding cabinetry but
can NOT cover the horizontal vent slots of the factory

toekick.

STEP 18C INSTALL CUSTOM
TOEKICK FOR FLUSH INSET
INSTALLATION
• A custom toekick can be installed to match or
complement the surrounding cabinetry. See
Installation Instructions for ZKFN Kit.
19