Grille Panel Dimensions; Design Guide; Flush Installation - Case Inset To Cabinet With Flush Doors The Installation Space - Monogram ZKBSN720NSS Instrucciones De Instalación

DESIGN GUIDE - STANDARD INSTALLATION
REQUIRED DIMENSIONS FOR GRILLE PANELS
Panels must be cut to the dimensions shown.
Grille Panel
IMPORTANT NOTE: The maximum weight for the unified
grill is 25 pounds.
Framed Panel Dimensions
A (Width)
1/4" (0.63 cm)
Framed Panel 69-7/8" (177.48 cm)
Overlay Panel Dimensions
A (Width)
1/4" (0.63 cm)
Backer Panel 69-7/8" (177.48 cm)
0.10" (0.25 cm) 68-1/2" (97.79 cm)
Spacer Panel
3/4" (1.9 cm) 70-1/8" (178.12 cm)
Overlay Panel
DESIGN GUIDE - FLUSH INSTALLATION
INSTALLATION SPACE
See ZKFN Kit for Installation Space, Unified Door
Panel Dimensions, Unified Grille Panel Dimensions,
Side Cleats, and Toe Kick Dimensions.
31-1000414 Rev. 1
A
B
B (Height)
8-7/8" (22.54 cm)
B (Height)
8-7/8" (22.54 cm)
7-5/8" (20 cm)
9" (22.86 cm)
Assemble the overlay panels as shown, using glue and
screws. Center the spacer panel on the backer panel.
Center the overlay panel on the backer and spacer panel.
3