Description; Technical Data - Hilti C 7/24 Manual De Instrucciones

2. Description

The charger is designed for charging Hilti batteries with
a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg-
er) or 7.2 – 24 volts (C 7/24 charger).
en
Voltage Designation
9.6 V SFB 105
9.6 V SBP 10
9.6 V RB 10
12 V SFB 125
12 V SBP 12
12 V SFB 121
12 V SFB 126
12 V BP 12
15.6 V SFB 150
15.6 V SFB 155
18 V SFB 180
18 V SFB 185
24 V B24/2.0
24 V B24/2.4
24 V B24/3.0
24 V BP 40,
BP 72
36 V BP 6-86
36 V B 36/2.4
* Typical charging times

3. Technical data

Charger
Refresh function
Cooling
Mains voltage
Mains frequency
Battery types
Output voltage
Output power
Charging times
Weight
Supply cord length
Dimensions (L×B×H)
Charging control
Protection class
Right of technical changes reserved
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5069451 / 000 / 00
Battery type Charging time
with C7/24
NiMH 45 min.*
NiCd 30 min.*
NiCd 20 min.*
NiMH 45 min.*
NiCd 30 min.*
NiCd 30 min.*
NiMH 45 min.*
NiCd 20 min.*
NiCd 30 min.*
NiMH 45 min.*
NiCd 34 min.*
NiMH 51 min.*
NiCd 48 min.*
NiCd 48 min.*
NiMH 72 min.*
NiCd 41–72 min.*
NiCd –
NiCd –
Items supplied
– C 7/24 standard charger
or
– C 7/36-ACS top charger
– Operating instructions
Charging time Examples of tools
with C7/36-ACS using this battery
30 min.* SF 100-A, SB 10, HIT-BD 2000
20 min.* SF 100-A, SB 10, HIT-BD 2000
15 min.* FS 10 Ferroscan (with adaptor)
30 min.* SF 120-A, SB 12
20 min.* SF 120-A, SB 12
20 min.* SF 121-A
30 min.* SF 121-A
15 min.* TCI 12 (with adaptor)
20 min.* SF 150-A
45 min.* SF 150-A
20 min.* SF 4000-A, SF 180-A
45 min.* SF 4000-A, SF 180-A
20 min.* UH 240-A, TE 2-A, WSR 650-A
24 min.* UH 240-A, TE 2-A, WSR 650 A
30 min.* UH 240-A, TE 2-A, WSR 650-A
20–36 min.* TE 5-A (with adaptor)
34 min.* TE 6-A (only C 7/36-ACS!)
34 min.* TE 6-A (only C 7/36-ACS!)
C 7/24
Manual refresh function
("Refresh" button)*
By convection
100–127 V ac
50/60 Hz
NiCd, NiMH
7.2 – 24 V
90 W
See table in section 2.
Approx. 1.0 kg (2.2 lbs)
Approx. 2 m (78.7 in)
(6.6 ft)
170×165×88 mm
(6.7×6.5×3.5 in)
Electronic charging control (microcontroller)
Electrical protection class II (double insulated) Z
* See section 6.3 for further information.
C 7/36-ACS
Automatic refresh function
("Refresh" function)*
Active cooling system
100–127 V ac
50/60 Hz
NiCd, NiMH
7.2 – 36 V
200 W
approx. 1.0 kg (2.2 lbs)
approx. 2 m (78.7 in)
(6.6 ft)
170×165×88 mm
(6.7×6.5×3.5 in)