Operational Instructions; Stand-Alone Test Operation; Power Supply - SATA STV Serie Manual Del Uso

中文
EN DE RU KO PT JA ES
96473/96474
Description:
1） Mini USB Serial Port Power Supply Interface and Communication Interface
2） External Bluetooth Communication Antenna
3） External WIFI communication antenna
4） Output shaft （bearing support inside）
5） Operation keys
6） Sound Hole of Buzzer and running Indicator Hole of Equipment
7） LED light-emitting band
8） OLED display
Scope of supply:
1） Torque Tester
2） 5V power adapter （100-240V AC 50-60 Hz input）
3） Sockets （96473 with a 3/8 to 11 mm socket, 96474 with a 3/8 to 19mm socket and a 1/2 to 19mm socket）
4） USB stick （including electronic version of operation manual, SATA Torque Tester V1.0 software and driver, etc.）
5） Calibration Certificate （with Qualified Seal）
6） Power cable （USB 2.0 to Mini USB T port 1.5 meters, for power and USB to serial communication）
7） Internal and external packaging

Operational instructions :

Stand-alone test operation:

Power supply:

Connect the torque tester （Mini USB T port） and 5V power adapter （USB 2.0 port） to supply power by random matching power
cable, and also connect the 5V DC power supply such as Charging battery and computer's USB port.
When the system is powered on, it will initialize the system. The time is about 10 seconds. When the system is powered on, the LED lamp
will display a red light, then the LED lamp will be green - > Red - > green, and then it will be extinguished. At the same time, the buzzer will
emit a sound, and the setting value of the torque will be displayed after S （Setting Value）. At this time, the system initialization can be
completed and enter working condition.
If the torque tester and computer software are not connected and data exchanged, the left and right two green lights on the lamp belt
of the torque tester will alternately light for 6 seconds and extinguish for 3 seconds, suggesting that they are working in a stand-alone
mode.
37