SATA STV Serie Manual Del Uso página 56

中文
EN DE RU KO PT JA ES
96473/96474
Delete users: Select the name of the user to be deleted, enter the password, at least one user will be retained, the system does not allow
deletion of all users, when deleting the last user, the system will alarm and withdraw the deletion step.
Change user: Change user password, need to know the original user password.
Write Settings: This button can be unlocked in general mode and WIFI connection or serial connection is established and data interaction
is normal. The font color is black in lock state. In general mode, the set torque of F region can be written into the torque tester by this
button. The set value of the torque tester will be transmitted back to the software in real time and displayed at the actual set torque
value of F region.
Area B is the input area of wrench selection and serial number.
Wrench selection: Wrench selection drop-down box is used to select the type of wrench in the verification mode, which is used to adjust
the parameters of the corresponding model tool set in the system settings, such as the verification torque at each stage.
Serial Number: This serial number input text box can input the serial number of wrench in general mode and verification mode to save
in the export test report. In general mode, the serial number is not mandatory input. In verification mode, the serial number of wrench
must be input, otherwise the verification can not start.
56