Entering The Setup Mode And Its Basics - Ikegami ISD-A31 Manual De Instrucciones

8-3. Entering the setup mode and its basics

8-3-1. SETUP MENU (Main menu)
Ｓ Ｅ Ｔ Ｕ Ｐ Ｍ Ｅ Ｎ Ｕ
→ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
ＧＡＩＮ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＳＥＴＵＰ ＥＸＩＴ
(1) CAMERA ID
(2) LIGHT CONTROL
(3) GAIN
(4) WHITE BALANCE
(5) SYNC
(6) MENU LOCK
(7) SETUP
① EXIT:
② CANCEL:
③ RESET:
* New settings can be saved, if EXIT is selected to quit the menu.
Up to 24 characters can be displayed on screen.
The backlight compensation and sensing area spotting
modes can be selected.
The gain control modes can be selected.
The white balance mode can be selected. The manual
white balance settings are also made.
The sync systems (INT and LL) can be selected and set
up.
The saved settings can be locked.
The EXIT, CANCEL or RESET action is selected and
executed.
Used to save the settings and to quit the menu.
Used to return the settings to the previously saved ones.
Used to return the settings to the factory ones.
E-11
Hold down the E button longer than 2
seconds, and the menu screen at left
appears on screen. A highlighted item
is now selected.