Ikegami ISD-A31 Manual De Instrucciones página 17

(2) ID characters setting
Keep CAMERA ID highlighted and
press the E button. The screen at
right shows up.
① ID
Press the E button on ID, and the
cursor appears. With the L or R
button, select a character. Press
the E button to save it, and the
character box advances to the next one. To delete a character, press the E
button to go through the code and place the cursor in the character to delete.
Press the L or R button to get the box blank.
② ID ALL CLEAR
Highlight this item and press the E button. The ID code is cleared.
③ ID POSITION
Highlight this item and press the L or R button. In this way, the ID code can
be positioned up or down.
④ RET
Press the E button to go back to the main menu screen.
8-4-2. LIGHT CONTROL
(1) Select LIGHT CONTROL on the
main menu screen. Press the E
button, and the screen at right shows
up.
(2) BACKLIGHT CMP.
Highlight this item and the backlight compensation modes can be selected (ON,
1SPOT, 2SPOT and OFF).
① ON
Normal backlight compensation mode is in effect.
ＩＤ ＥＤＩＴ
→ＩＤ.....................
ＩＤ ＡＬＬ ＣＬＥＡＲ
ＩＤ ＰＯＳＩＴＩＯＮ ＵＰ
ＲＥＴ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
→ＢＡＣＫＬＩＧＨＴ ＣＭＰ． ＯＦＦ
Ｗ．ＤＹＮＡＭＩＣ
ＩＲＩＳ ＬＥＶＥＬ
ＬＥＮＳ ＩＲＩＳ
ＦＦＤ ＯＦＦ
ＲＥＴ
E-13