Publicidad
Step 7
Before fastening the DOOR to your unit, be sure the
å
mounting screw is against the stops as shown in the
diagram. If it isn't, loosen the mounting screw to slide it
against the stops. Then tighten the mounting screw.
Fasten the FLIP-UP DOOR (J) to the SMALL SHELF (H).
å
Use the screws in the HINGE. See step 9 for adjustments.
NOTE: The top edge of the DOOR (J) and the top surface
å
of the SMALL SHELF (H) should be even.
Fasten the KNOB (W) to the FLIP-UP DOOR (J). Use the
å
BLACK 1-1/8" MACHINE SCREWS (Z).
Page 12
Z
BLACK 1-1/8" MACHINE SCREW
(1 used for the KNOB)
Hinge
Mounting
screw
Stop
J
H
412091
Want options? Customize
your item with add-on
hardware kits available
on sauder.com.
W
www.sauder.com/services
Publicidad
