Sauder 412091 Manual Del Usuario página 13

Step 8
Fasten the SHELF (G) to the UPRIGHTS (C and D).
å
Tighten four TWIST-LOCK® FASTENERS.
NOTE: Be sure the CAM DOWELS in the SHELF insert
å
into the holes in the LEFT END (B).
Fasten the SHELF (G) to the LEFT END (B). Tighten two
å
HIDDEN CAMS.
Maximum
210 degrees
Minimum
190 degrees
www.sauder.com/services
B
G
Arrow
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Dowel end
D
C
S u r
f a c
e w
i t h
H I D
D E N
C A
M S
412091
®
FASTENER
Rounded edge
Page 13