Kickback Information; Saw Chain Filing And File Gauges - Husqvarna 455 Rancher II Manual De Instrucciones

Kickback information

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
The following cutting attachments are approved for the models Husqvarna 455 Rancher II, 455e Rancher II and 455e
Rancher II TrioBrake.
Guide bar
Length, inch Pitch, inch
15
16
3/8
18
20
The following cutting attachments are approved for the model Husqvarna 465 Rancher II.
Guide bar
Length, inch Pitch, inch
15
16
18
3/8
20
24
28
Note: For the chains above you are free to choose between 0.050" and 0.058" gauge drive link for the corresponding
bar, see the table below.
0.050"/1,3 mm
0.058"/1,5 mm
Saw chain filing and file gauges
42 – English
TECHNICAL DATA
Gauge, inch
0.050
Gauge, inch
0.058
H80 H46 H47
H81 H42 H48
Saw chain
Max. nose
Type
radius
Husqvarna H80,
11T Husqvarna H46,
Husqvarna H47
Saw chain
Max. nose
Type
radius
Husqvarna H42,
11T Husqvarna H48,
Husqvarna H81
Drive link
count
64
66
72
80
Drive link
count
56
60
68
72
84
92