Festo CPV-DI01 Serie Manual De Instrucciones página 20

5 Addressing
The CPV Direct must be addressed differently according to
the field bus protocol. In general the following applies:
1. A CPV valve terminal always occupies 16 output
addresses.
A CP valve location occupies two addresses:
– lower-value address = pilot solenoid 14
– higher-value address = pilot solenoid 12.
2. CP valve terminals, electric input or output modules on
the extension string each occupy 16 input or output
addresses.
Details and examples of addressing the CP system can be
found in the manual P.BE-CP-DI01-.. .
20 Festo CPV..GE-DI01-8 0107a English