Removing And Installing Lower Plate - Panasonic QUICKDRAW MC-V7319 Instrucciones De Operación

WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury from cleaner suddenly
starting.

Removing and Installing Lower Plate

Rear Belt
Cover
Couvercle de la
courroie
Cubierta de
la correa trasera
Lower Plate
Plaque inférieure
Base inferior
Lower Plate
Plaque inférieure
Base inferior
Rear Belt
Cover
Couvercle de la
Tabs
courroie
Languettes
Cubierta de
Lengüetas
la correa trasera
Electrical Shock or Personal Injury Hazard
➢ Before servicing any parts, disconnect
Latches
vacuum from electrical outlet.
Loquets
Lengüetas
➢ Place paper under nozzle whenever
lower plate is removed to protect floor.
➢ Place handle in upright position and
turn vacuum over to expose lower plate.
➢ Release lower plate by pressing two
(2) latches inward.
➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ Close the rear belt cover and reinstall
lower plate by hooking front end of
lower plate into the front of nozzle
housing.
➢ Make sure all wires are routed
properly and not pinched.
➢ Press lower plate into place then
push two (2) latches outward.
Latches
Loquets
Lengüetas
- 32-