Heath Zenith 7582 Manual Del Usuario página 9

TUNE SETTING
Wired chime instructions
The chime has different selectable tunes. The push button connected
to the "REAR" terminal will only play Ding-Dong (two note tune).
The push button connected to the "FRONT" terminal will play any
of the musical tunes (see the Tune Selection Guide, page 14). To
change the musical tune, press and release the "TUNE" button on
the chime until desired tune is heard.
Wireless chime instructions
The chime has different selectable tunes: Ding-Dong (two note tune)
or a selectable musical tune (see the Tune Selection Guide, page
14). This tune can be changed by following these instructions. Note:
All chime models are designed to work with up to 5 wireless push
buttons (sold separately). All chimes are designed to play only two
different tunes no matter how many push buttons are used. See the
Tune Setting Tables for details.
SYNC – PRESS
AND RELEASE.
RESET – HOLD
10 SECONDS.
TUNE – HOLD
Helpful Videos – www.hzsupport.com
FRONT TRANS REAR
1 SECOND.
Tune Setting Table – Chime and Push Button 3A Settings
Push Button 3A
Switch 2 - ON
(Back Door)
Switch 2 - OFF Press and release "TUNE"
(Front Door) button on chime until desired
tune is heard.
Tune Setting Table – Chime and Push Button 3B Settings
Push Button 3B
Jumper - ON
(Back Door)
Jumper - OFF Press and release "TUNE"
(Front Door) button on chime until desired
tune is heard.
Tune Setting Table – Chime and Push Button 3C Settings
Push Button 3C
Jumper 8 or
Switch 8 - ON
(Back Door)
Jumper 8 or Press and release "TUNE"
Switch 8 - OFF button on chime until desired
(Front Door) tune is heard.
-9-
Chime Tune
——— Ding-Dong
Selected
musical tune
Chime Tune
——— Ding-Dong
Selected
musical tune
Chime Tune
——— Ding-Dong
Selected
musical tune
Helpful Answers – 1-800-858-8501