To Prepare To Start With A Warm Engine - Husqvarna 439 Manual Del Usuario

2. Press the air purge bulb about 6 times or until fuel
starts to fill the bulb. It is not necessary to fill the air
purge bulb fully.
3. Pull the choke control to set it in choke position.
To start the product on page 13 for
4. Continue to
more instructions.

To prepare to start with a warm engine

WARNING The chain brake must be
engaged when the product is started to
decrease the risk of injury.
1. Move the front hand guard forward to engage the
chain brake.
823 - 006 - 18.09.2019
2. Press the air purge bulb about 6 times or until fuel
starts to fill the bulb. It is not necessary to fill the air
purge bulb fully.
To start the product on page 13 for
3. Continue to
more instructions.
To start the product
WARNING You must keep your feet in a
stable position when you start the product.
WARNING If the saw chain rotates at idle
speed, speak to your servicing dealer and
do not use the product.
1. Put the product on the ground.
2. Put your left hand on the front handle.
3. Put your right foot into the footgrip on the rear
handle.
4. Pull the starter rope handle slowly with your right
hand until you feel resistance.
WARNING Do not twist the starter rope
around your hand.
5. Pull the starter rope handle quickly and with force.
CAUTION Do not pull the starter rope to
full extension and do not let go of the
13