Defiant DFI-5985-WH Manual Del Usuario página 9

Operation (continued)
7
Adjusting the light settings
After the light is paired to the mobile app, the yellow
circle around the light will change to green.
□
Touch the light icon.
□
Touch "Settings" to adjust the light controls.
□
Touch "Save" after all adjustments have been
made. Setup is complete.
NOTE: Changes made to one light's settings will not
affect another light's settings.
7:15 AM
68%
Settings
ON time
5 minutes
Full ON brightness level
75%
Sensitivity
Medium
DualBrite time
3 hours
DualBrite dimming level 25%
Cancel Save
Android
8
Setting the sensor for testing
NOTE: The light fixture will operate during the day or
night during testing. The light will stay on for 8 seconds
after all motion is stopped.
The light fixture will automatically enter "Test" mode
whenever the "Sensitivity" option is changed. The light
fixture will remain in "Test" until one of the following
actions occurs:
□
The "Save" or "Cancel" option is selected.
□
No movement during the testing process for 30
seconds.
□
Three minutes have passed without changing
one of the on-screen settings.
9:25 PM
ATT 100%
Porch Settings
ON Time: 5 Minutes
1 Minute 5 Minutes 20 Minutes
Full ON Brightness Level: 85%
Sensitivity: Medium
Low Medium High
DualBrite Time: 3 Hours
Off 3 Hours 6 Hours
Dusk to Dawn
DualBrite Dimming Level: 25%
Cancel Save
iOS
The "ON-TIME" option determines the amount of time
the light will stay on "Full ON Brightness Level" after
all motion has stopped.
The "Full ON Brightness Level" option determines the
light brightness level after the light has been turned
on by motion.
The "Sensitivity" option increases and decreases the
size of the detection area.
The "DualBrite" option determines the amount of
time the lights stay on at a reduced light level after
sundown. Switching this setting to "OFF" will not
affect the "ON-TIME" setting.
The "DualBrite Dimming Level" option determines the
light brightness level of the reduced light level after
sundown.
NOTE: The higher the "Sensitivity" setting, the greater the
possibility of false triggering. To reduce false triggering,
select a lower setting.
NOTE: The "Dusk-to-Dawn" setting keeps the lights on at
an accent level from sundown to sun up.
NOTE: If the "DualBrite" option is set to OFF, changing the
dimming level will have no affect on the light.
□
Set the "DualBrite" option to the "OFF"
position.
□
Set the "Sensitivity" option to the "LOW"
position.
NOTE: The motion sensor will need to completely warm
up (60 seconds) before beginning the setup process.
9
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.COM