Installation (continued)
7
Caulking around the light
fixture
□
Caulk around the 1-2- asy Connect™ (D) and
mounting surface with silicone sealant (not
included).
Operation
1
Adjusting the lamp heads
WARNING: Risk of fire. Keep the lamp heads at least
2 in. (51 mm) from combustible materials.
CAUTION: Keep lamp heads 30° below horizontal to
avoid water damage and electrical shock.
□
Turn the power on at the circuit breaker or fuse
and turn on the wall switch.
□
If needed, gently grasp the lamp heads (A) and
tilt them up or down or side to side to adjust
the light coverage area.
A
D
2
Rotating the sensor controls
downward
□
Rotate the motion sensor (C) so the text faces
upward.
NOTICE: All clearances must be maintained. See Safety Information
on page 2.
NOTICE: The Defiant mobile app must be downloaded to operate
the light fixture. See Step 3 on page 8 for instructions.
C
7
Please contact 1-866-308-3976 for further assistance.
THIS SIDE UP
270°
HOMEDEPOT.COM