Setting Up And Connecting The Charging Station - SEVERIN RB7028 Manual De Instrucciones

Chill.book Seite 60 Dienstag, 8. Dezember 2015 3:13 15

6 Setting up and connecting the charging station

15
16
60
6 Setting up and connecting the charging station
1. Set up the charging station on a wall within range of an
outlet socket with the appropriate free space as shown in
the illustration (fig. 15).
TIP: To secure the charging station, the mounting plate on
the back of the charging station can be screwed or stuck to
the wall.
2. Connect the mains adapter to the charging station
(fig. 16).
3. Connect the mains adapter to an outlet socket.
TIP: We recommend that you check whether the robot finds
the charging station. To do so, place the robot in the room
and press " " on the remote control (chapter „Setting
the cleaning duration", page 67). If the robot does not find the
charging station, place the charging station in a more acces-
sible position.