Return To The Charging Station; Stopping The Robot; Finding The Robot - SEVERIN RB7028 Manual De Instrucciones

Chill.book Seite 68 Dienstag, 8. Dezember 2015 3:13 15
8 Cleaning a room

8.6 Return to the charging station

8.7 Stopping the robot

8.8 Finding the robot

68
You can also use the intensifying function to start up the ro-
bot from the charging station:
1. Press and hold " ".
2. Point the red dot of light at a spot in front of the robot until
it leaves the charging station. After intensive cleaning,
the robot resumes cleaning in automatic mode.
3. Press " ", " " or "
mode.
– Press " " so that the robot returns to the charging sta-
tion.
TIP: Alternatively, to have the robot return to the charging
station by using the control panel, press the Power LED
" " repeatedly until "00
– Press " ".
TIP: 3 minutes after the robot stops or has been stopped, it
switches to sleep mode. (Power LED "
key on the robot or remote control to activate the robot again.
Clap loudly 3 times. The robot responds with 3 sound signals
and the control panel flashes.
" to set the desired cleaning
" is displayed.
" is off). Press any