Adjusting The Suction Power - SEVERIN RB7028 Manual De Instrucciones

Chill.book Seite 65 Dienstag, 8. Dezember 2015 3:13 15
8 Cleaning a room
2. Set the duration of cleaning and the return to the charg-
ing station after cleaning.
chapter „Setting the cleaning duration", page 65
3. Set the suction power.
chapter „Adjusting the suction power", page 65
4. Wait 3 seconds until the robot begins cleaning.
Setting the cleaning duration
1. Press the Power LED "
cleaning duration is set and the automatic return to the
charging station is switched on/off:
– "00 ": Robot returns to charging station
– "30": Robots vacuums for 30 minutes.
– "45": Robots vacuums for 45 minutes.
– "60": Robots vacuums for 60 minutes.
– "30 ": Robot vacuums for 30 minutes and then return
to the charging station.
– "45 ": Robot vacuums for 45 minutes and then return
to the charging station.
– "60 ": Robot vacuums for 60 minutes and then return
to the charging station.
– "99 ": The robot vacuums until the rechargeable bat-
tery starts to run out (90-120 minutes) and then returns
to the charging station.
2. Set the cleaning pattern.
chapter „Setting the cleaning pattern", page 64
3. Set the suction power.
chapter „Adjusting the suction power", page 65
4. Wait 3 seconds until the robot begins cleaning.

Adjusting the suction power

1. Press the " " button repeatedly until the desired suc-
tion power is set:
– " ": low suction power
– " ": high suction power
– no symbol: OFF
2. Set the cleaning pattern.
chapter „Setting the cleaning pattern", page 64
" repeatedly until the desired
65