Controlling The Robot With The Control Panel - SEVERIN RB7028 Manual De Instrucciones

Chill.book Seite 64 Dienstag, 8. Dezember 2015 3:13 15
8 Cleaning a room

8.4 Controlling the robot with the control panel

20
64
TIP: The robot confirms each input with a sound signal. If the
setting is not plausible, 2 sounds signals can be heard.
1. Press the Power LED "
If no button is pressed on the robot or on the remote control
within 3 seconds, the robot starts cleaning with the current
settings.
Setting the cleaning pattern
1. Press the " " button repeatedly until the LED for the
desired setting lights up:
– " ": Travel in a spiral pattern
– " ": Follow the wall
– " ": Travel in straight lines
– " ": Random mode
– " ", " ", " ", "
TIP: The robot switches between the different cleaning
modes automatically in accordance with the situation.
" to activate the robot.
": Automatic mode