Setting The Weekly Schedule; Configuring The Cleaning Module For The Weekly Schedule - SEVERIN RB7028 Manual De Instrucciones

Chill.book Seite 70 Dienstag, 8. Dezember 2015 3:13 15
9 Setting the time and weekly schedule

9.2 Setting the weekly schedule

9.3 Configuring the cleaning module for the weekly schedule

70
This setting enables you to have the robot clean automatical-
ly on set days of the week, at a certain time.
1. Press the "Set" key repeatedly until SET and "
on the display screen.
2. Press the "Select" key.
3. Use the "+" and "-" keys to set the hours.
4. Press the "Select" key.
5. Use the "+" and "-" keys to set the minutes.
6. Press the "Select" key.
7. Select the day(s) of the week on which you wish the ro-
bot to clean:
– Complete week (all the days of the week flash)
– Monday to Friday (Mo, Tu, We, Th and Fr flash)
– Monday to Saturday (Mo, Tu, We, Th, Fr and Sa flash)
– Saturday and Sunday (Sa and Su flash)
– Individual day of the week (one day of the week flashes)
8. Press the "Select" key.
– " " is displayed.
– The weekly schedule has been set.
1. Connect the robot to the mains adapter or place it on the
charging station.
2. Press the Power LED "
3. Set the cleaning pattern.
chapter „Setting the cleaning pattern", page 64
4. Set the duration of cleaning and the return to the charg-
ing station after cleaning.
chapter „Setting the cleaning duration", page 65
5. Set the suction power.
chapter „Adjusting the suction power", page 65
TIP: You can also make the settings using the remote con-
trol.
)
" flash
".