KTM Power Parts 69012034044 Manual Del Usuario página 16

Insert the bushes supplied into the drill holes of the control unit.
Fit the control unit on the retaining bracket using the M6x20 hex screws.
16
Connect the control unit.
The voltage regulator gets hot!
Make sure there is enough space between the cables and the voltage regu-
lator.
Fox the cable to the frame using the cable binder.
Final steps
Fit the optionally available racing fairing.
GFK front cover (690.08.101.000)
GFK engine bottom cover (690.08.160.000)
GFK front fender (690.08.110.000)
GFK left side fairing (690.08.102.000)
GFK right side fairing (690.08.103.000)
GFK rear cover (690.08.114.000)
GFK seat cover (690.08.147.000)
Quick releases (690.08.901.050)
Counterpart of quick releases (450.07.040.050)