Dash Disassembly - Metra 95-890 Instrucciones De Instalación

1. Unclip and remove panel
surrounding shifter including
ashtray. (Figure A)
2. Remove (1) Phillips screw per
side panel then unclip and remove
panels. (Figure B)
3. Remove (6) Phillips from radio to
remove. (Figure C)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
95-8901
4. Remove (4) screws securing the
climate control to the radio/climate
control assembly then unclip and
remove climate control. (Figure D)
NOTE: You will need to unclip
the climate control cable from
behind the pocket, above the
radio, in order to remove the
radio and climate controls.
(use caution when removing the
pocket as the dash will scratch
very easily) (Figure E)
Continue to kit assembly
2
2 Screws Per Side
(Figure D)
(Figure E)