Door Handle Install Illumination (Optional); Reversing The Door Swing - Candy CVBN 6184WBF/S1 Manual De Instrucciones

When installing the unit, ensure that 10 cm of free space is left at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow cold air to circulate around the wine cooler and
improve the efficiency of the cooling process.

Door Handle Install Illumination (optional)

2.2
1) Take out the screw caps from the door handle holes.
2) Put the handles into the screw holes and then hit them to fix.
3) Cap the screw caps on the handle screws.
4) Take out the screw caps from the handle screw holes.
5) Remove the screws and take the handles down.
6) Cap the screw caps on the door handle holes again.
7) Install the handles into the door handle holes of the other side in accordance with the handle
installation instructions.

Reversing the Door Swing

2.3
1) Take off knuckle guard.
Take off the door of refrigerating
3)
chamber.
2) Take off top hinge.
Assemble the door of freezer
7)
chamber on the lower hinge.
13