Candy CCDS 6172WN Manual De Instrucciones página 18

Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
If without top cover, please reverse door as follow.
1. Unscrew top hinge cover and then unscrew the top hinge .
Then lift upper door and place it on a soft pad to avoid scratch and damage.
2. Remove the pin with a screwdriver and flip the hinge bracket.
Then refit the pin to hinge bracket.
3. Remove the top left screw cover.
4. Unscrew middle hinge.
17