Fora Diamond GD50 Manual Del Usuario página 14

2. Connect the device with your computer using a USB/RS-232
Cable Connect the USB/RS-232 cable to a USB port on
your computer. With the FORA Diamond GD50 switched
off, connect the other end of the USB/RS-232 cable to
the FORA Diamond GD50 data port. "
on the meter display, indicating that the meter is in
communication mode.
3. Transfer data to your computer
Follow the software on-screen instructions to transmit
data. The data transmitted will include results with
date and time. Remove the cable and the device will
automatically turn off.
Data Transmission Via Bluetooth (For
GD50b)
You can use your device with an iOS (5.0.1 or higher) Android
system (4.3 API Level 18 or higher) or PC (Windows 8 or
higher) to download data from your GD50b via Bluetooth.
Follow the steps below to transmit data from your GD50b.
Please contact your local customer service or place of
purchase for assistance.
" will appear
EN-12
1. Install the software (iFORA BG) to your device
with an iOS or Android system.
2. Every time the GD50b is turned off, the Bluetooth will be
initiated for data transmission. The Bluetooth indicator
flashes in blue.
3. Make sure your GD50b is already paired with your device
with an iOS, Android system or PC by following the
instructions as below.