Garantía Limitada De 2 Años; Preparación Para El Funcionamiento; Especificaciones; Operation - Inflate Toys And Air Mattresses - Husky HY120 Guía De Uso Y Cuidado

Garantía Limitada de 2 Años
Si en el transcurso de dos años a partir de la fecha de compra, este producto Husky presenta fallas debido a un defecto de
material o mano de obra, devuélvalo a cualquier tienda de The Home Depot a fin de reemplazarlo.
Comunícate con el Servicio al Cliente al 1‐888‐HD‐HUSKY o visita www.huskytools.com.
Preparación para el funcionamiento

ESPECIFICACIONES

Requisitos de Potencia 120 VCA 60Hz. 1.1 A
CONSUMO PROMEDIO DE .47 SCFM a 30 PSI
AIRE
Máx. Presión 130 PSI
4
Operation – Inflate Toys and Air Mattresses
1
Connecting the inflator
□
Place the inflator on a flat surface.
□
Plug the power cord into a grounded 120 volt outlet.
□ Select the appropriate inflation accessory (G, H, or I)
and insert it onto the end of the quick connect valve
adaptor (J). Make sure that the accessory (G, H, or I) is
flush with the end of the quick connect nozzle (J) so
that the airflow to the accessory is not blocked by the
tire valve pin inside the quick connect nozzle (J).
CAUTION: Do not over‐inflate the item being inflated.
Follow the manufacturer's suggested PSI levels on the
item you are inflating.
3
Disconnecting the inflator
□ Remove the inflation accessory (G, H, or I) from the
quick connect valve adaptor (J).
□ Unplug the power cord from the 120 Volt outlet and
allow the inflator to cool.
2
Operating the inflator
□
Insert the inflation accessory into the desired item
you are inflating.
□ Move the On/Off switch (A) to the I position and
inflate your item to the correct pressure.
□ Move the On/Off switch (A) to the O position when
you are finished inflating to turn the inflator off.
7 HUSKYTOOLS.COM
Please contact 1‐888‐HD‐HUSKY for further assistance.