Operation - Inflate Tires - Husky HY120 Guía De Uso Y Cuidado

Operation – Inflate Tires
1
Connecting the inflator
□
Place the inflator on a flat surface.
□
Plug the power cord into a grounded 120 volt outlet.
□ Connect the quick connect valve adaptor (J) to the
tire air valve by pushing the valve lever on the
adaptor (J) down until it is securely attached to the
tire air valve.
CAUTION: Do not over‐inflate the item being inflated.
Follow the manufacturer's suggested PSI levels on the
item you are inflating.
3
Disconnecting the inflator
□
Remove the air hose (K) from the tire by lifting up on
the quick connect valve (J) lever and removing the
valve (J).
□
Unplug the power cord from the 120 Volt outlet and
allow the inflator to cool.
2
Operating the inflator
□
Move the On/Off switch (A) to the I position to turn
the inflator on. Monitor the PSI on the pressure gauge
(C) to fill your item to the desired pressure.
□
Once you have reached your desired air pressure,
move the On/Off switch (A) to the O position.
A
6
Preparación para el funcionamiento (continuación)
CONTENIDO DEL PAQUETE
C
Pieza Descripción
A Interruptor de Encendido y Apagado
B Asa para Transportar
C Manómetro Análogo que Brilla en la
Oscuridad
D Cable de Eléctrico
E Enchufe con Conexión a Tierra
F Alojamiento de la Manguera de Aire
G Boquilla para Inflar Colchones
H Aguja para Artículos Deportivos
I Adaptador de Válvula Presta
J Adaptador de Válvula de Conexión Rápida
K Manguera de Aire de Goma
5
Para obtener asistencia, llama al 1‐888‐HD‐HUSKY.
Cantidad
1
1
1
1
1
1
1
1
1
1
1
HUSKYTOOLS.COM