Battery Installation - General DT898P Manual De Usuario

DT898P Manual-FINAL-100907

BATTERY INSTALLATION:

Lift off the battery cover at the back, install 1 "AAA" alkaline
battery according to the polarity indicated. Close the battery
cover.
NAME AND FUNCTIONS OF BUTTONS:
Button: Press Function:
MODE Time > Date Time ...
Press and hold MODE to select Hour.
Press SET to advance. Sequentially pressing
MODE again will select minutes, months, then days.
Pressing SET will advance digits.
Press MODE again to exit and confirm settings.
SET Alarm on (
Ice alert function (
in lower LCD segment.
°C/°F °C > °F > °C ...
Time Display
24hr mode display dd/mm, 12 hr displays mm/dd
MIN/MAX
IN & OUT MAX temps > IN & OUT MIN temps >
IN & OUT current temperatures ...
Displays for 8 seconds. Auto exit in 8 secs. While
MAX or MIN values displaying on screen, press
CLEAR to clear records and temperature trend.
SNOOZE
In snooze mode (icon Zz in upper LCD segment),
triggers 8-minute repeating snooze alarm.
In Normal Alarm mode (icon U appears), STOP
alarm for 1 day.
CLEAR Alarm Time & Set:
In normal mode, press CLEAR to read alarm time.
When reading alarm time, hold CLEAR for 2 sec.
to re-set alarm time
This product is designed for indoor use only (sensor is suitable
for outdoor use). Do not position in direct sunlight and in air
currents.
) > Snooze Alarm (zZz)> Alarm off...
)
10/9/07
Hold 2 seconds:
to set time/date
to enable/disable
to change 12/24
not applicable
not applicable
to change alarm time
12:11