Kohler K-9607-R Guia De Instalacion página 8

Ferrule
5. Connect Water to Dispenser Head
Remove the nut and ferrule from the outlet of the saddle or gate
valve. Place the nut and ferrule over the end of the white coded
1/4" copper tube coming from the dispenser head. (The nut and
ferrule are not provided).
Push the tube end into the valve opening until fully seated. Hold
the tube in position and push the ferrule down over the tube end.
Tighten the nut over the ferrule with your fingers. Make sure that
the tube end has been inserted straight into the hole.
IMPORTANT! Risk of product damage. Use care when tightening
the nut, as overtightening may damage the product
Tighten the nut firmly with a 1/2" wrench.
112114-2-BE
Nut
8 Kohler Co.