Kohler K-9607-R Guia De Instalacion página 9

Level the tank to ensure
proper operation.
Mount tank vertically in an area that allows clearance
on the underside of the tank for drainage, if necessary.
DO NOT over tighten screws.
6. Mount the Tank
IMPORTANT! The tank must be mounted within 16" (40.6 cm) of
the faucet and within 30" (76.2 cm) of the outlet.
Position the tank in the mounting location. Make sure that the
tank is level, and mark the location of the mounting screws.
NOTE: The screws provided are for use in wood. Use wall anchors
(not provided) for drywall installations.
Drill a 1/8" pilot hole at each mark.
Install the screws, leaving 1/4" (6 mm) exposed.
Hang the tank on the screws.
Tighten the screws until the tank is secure against the wall.
Kohler Co.
1/4" (6 mm)
Leave 1/4" (6 mm)
gap for hanging
tank.
9 112114-2-BE