BP7499 SW93 SW95 SW96.qxp_Layout 1 12/1/14 2:39 PM Page 10
CAUTION
For fans equipped with built-in
variable speed devices: These
devices must be set at their
MAXIMUM SPEED for proper
operation. Adjustments to their
setting must only be made with
this fan control in the OFF
position. Changing or switching
these settings while the fan
control is in operation could
damage the control.
NOTE: Fan control knob turns fan
on at maximum speed to assist
motor
start-up.
decreases with clockwise rotation.
5.1
Set the fans on their hIGh speed
pull chain settings. Then use your
speed control to select any of the
speeds, plus OFF.
NOTE: Fully counter-clockwise is
OFF. The three or four fan speeds
are selected by rotating the knob
one position at a time clockwise.
5.2
IMPORTANT
Always have the fan switch set to
HIGH speed before using the wall
control. To avoid accidental pull
chain use, shorten chain by
cutting it 1-inch below switch
body.
5. Operation
WALL
CONTROL
Fan
speed
1st Pull—HIGH
2nd Pull—Medium
10
3-SPEED SWITCH
PULL CHAIN
CHAIN COUPLER
3rd Pull—Low
4th Pull—OFF
CHAIN COUPLER
SHORTENED
3-SPEED SWITCH
PULL CHAIN
U.L. Model No.: SW93/SW95/SW96