Telefunken TF 652 COSI COMBO Instrucciones De Uso página 19

MODIFY PIN
BASE DEFAULT
HS settings
Press OK key and use ∧ or ∨ to select HS SETTINGS.
You have the following options:
ALARM
Set the alarm on the handset. Press ∧ or ∨ key to select ON or OFF,
press OK key to confirm. After select ON, press OK key to set the
time. Set up the snooze. Press OK key to confirm your selection.
The appears on the top of the display.
NOTE: If the SNOOZE is set ON, the alarm will be repeated every
5 minutes for about 9 times. During alarm, press any key except
to snooze the alarm for 5 minutes. If the SNOOZE is set OFF,
the alarm will sound for 45 seconds only one.
RING SETUP
Change the handset ringing for internal (INT RING) and external
(EXT RING) calls. There are 10 ringer melodies and 5 volume
levels.
NOTE: If you select ring OFF for INT RING, it will not ring during a
call transfer from the base or another handset. If you select ring
OFF for EXT RING, there will be a ringing off icon
screen and the handset will not ring during incoming call.
TONE SETUP
Change the handset tone settings. In this menu, press ∧ or ∨ key
to select KEY TONE, BATTERY LOW warning or RANGE ALARM
(when the handset is out of the range) setup. Press ∧ or ∨ key to
select ON or OFF to enable/disable the sound of beeps
respectively.
LANGUAGE
HS NAME
AUTO ANSWER
1000ms) to meet phone line or PABX requirements.
Change your PIN. The default PIN is 0000.
Restore base factory default settings.
Set up the language of the handset.
Change the handset name
Handset can be set to answer an incoming call
display on the
19