Research Handset(S); Call Transfer - Telefunken TF 652 COSI COMBO Instrucciones De Uso

Research handset(s)

Press INT key on BASE, then press "9" on the keypad of the base to page
all paired handsets. Press INT key again to cancel the paging.
Intercom
The intercom feature is activated by pressing the INT key.
From Base
Press INT key once. If you have only one paired handset, the display
will show "CALLING HS1".
If you have more than one paired handset, the display will show "HS?"
with the registered handset numbers above. Press the number of
handset. On the handset, answer the call by pressing (or ) key.
From Handset
Press INT key, you hear a beep and display shows "HS?" with the
numbers of other handsets, and "0" for the base. Key in the number you
want.

Call transfer

Transfer the call by base unit
During a call, to transfer the call to a handset, press the INT key.
The call will be put on hold. If the base has only one paired handset, it
will transfer directly. Key in the number of handset, if there are several
paired handsets. Press key of the handset to answer the call. Base
and handset will be connected. To complete the transfer, the transferring
phone should hang up (the base in this case).
Transfer the call by handset
Press the INT key. Key in the number of the handset or the base (base
number is "0") you want to transfer the call to. The external call will be put
on hold. To complete the transfer, press key on initial handset.
If the other handset or base does not answer, you can get back to the
external call by pressing INT key again or you will automatically be
21